In a service notice, Canon notes, “We have discovered that images taken by some EOS-1D Mark III and EOS-1Ds Mark III digital SLR cameras may exhibit ring-shaped spots…. These ring-shaped spots are the images of oil lubricant on the surface of the low pass filter (LPF), which is located in front of the CMOS sensor. This oil is used inside the Mirror Box to lubricate some of the camera’s moving parts. If the oil is applied too liberally when the camera is manufactured, it can become scattered onto the surface of the LPF through normal camera operation.”
If you’ve experienced this oil spotting or have seen oil on the surface of the back side of the mirror, contact Canon’s Customer Support Center. It will arrange free cleaning of the mirror box.
Canon U.S.A., Inc. Customer Support Center:
800-828-4040
ca********@********on.com
This article was last modified on December 14, 2022
This article was first published on May 18, 2009
Commenting is easier and faster when you're logged in!
Recommended for you
Photography Camera Aperture Explained
Aperture is part of what photographers refer to as the Exposure Triangle, along...
Scanning Around with Gene: Seeing Pictures With Both Eyes
When I die and go to my Heaven, it’s going to look like a store in Berkeley, Cal...
Review: Canon EOS M
Shutter noise in E flat major I photograph musical events in my community, speci...